CBT-T3 TEST
Lanmei Airlines MED Training Interior Test
Time: 45mins
1、Which copy must be removed after completion by the departing Commander before each flight and handed over to the ground handing agent in order to remain at the departure station.
The white copy
The yellow copy
The pink copy
2、“action taken” regulations do not include:( )
all words need writed in english and majuscule
replace items and test/check need writed down relevant amm chapter,like xx-xx-xx (at least six numbers);
DMI no. need writed down (if has) ; mel “yes” or “no” need marked ; “cat” need to writed down(if necessary)
all words need writed in english and chinese
3、Area with gray color in ATL should be filled by:
Flight Crew
Cabin Crew
Maintenance Member
4、All maintenance carried out on company aircraft must be done in accordance with the contents of which manual?
MCM
MPM
MPM or MCM
MPM and MCM
5、Which of the following item maybe mailed in air?
Patient apsciments
Infectious substances
Small lithium battery
All above
6、The wrong action of the battery/PED fire or smoke is:
Use the standard procedure and use fire extinguisher.
Remove external electrical power from device.
throw device to the waste bin quickly.
Do not move device untill the device has been cooled.
7、For engines, the systems include all associated units – mechanical, hydraulic, electrical, electronic or pneumatic – that control:
power output
speed
frequency
8、During installation of control systems, all system components that will not be accessible for inspection after complete assembly of the aircraft must be inspected in ( ) before concealment
by oneself
duplicate
single
trio
9、Certification of a duplicate safety inspection must be entered in( ) or other acceptable maintenance record
the aircraft technical log
Checklist
AMM copy
10、Our campany apply for ( ) minutes ETOPS operation
11、Which concern do ETOPS Significant System not cover ?
Systems that require precautions to avoid multiple maintenance errors
Systems that require a specific reliability monitoring for ETOPS
Systems that isn’t included in the reporting to the Authorities for safety reasons
12、Find Structural damage criteria in ( ).
13、General grinding standard: rivet area maximum no more than 10%, non-rivet area 20%.If the manuals standard is not clear or polished beyond the standard, it must be reported to( )
Airbus
engineer
company
SSCA
14、To achieve effective lightning protection,lightning protection equipment must meet two conditions:
To achieve effective lightning protection,lightning protection equipment must meet two conditions:
Effective grounding
Contact with lightning before protecting the target and Effective grounding
16、Refer ( ) manual to do the troubleshooting with ECAM Failure Massage
17、In which manual can we find the aircraft skin damage limitation standand?
18、If a continuous maintenance work being performed by a maintenance personnel, and cannot be completed within the limited time and if continued by the same personnel would be implemented for the quality and safety of the maintenance, can the working time of one day exceed 11 hours?
19、the content of technical release needs to be checked:
the content of technical release needs to be checked:
The item to be inspected has been completed and signed.
The documents of the technical documents that the aircraft must be equipped are complete and valid.
all of the above
20、The engine ground running test, the test crew and the airport tower communicate through ()
HF
VHF
HF or VHF
HF and VHF
21、when the engine is ground running tested, the aircraft nose is best () parked
downwind
facing the wind
downwind / wind can be
22、the following classification of fire, which one is wrong ( )
Class A fire caused by the burning of ordinary burning materials
Class C fire caused by the burning of electrical equipment
Class C and D fires are caused by the burning of flammable petroleum products.
23、if the tool is lost and it is not certain whether it is on the plane, then
can release the plane
can not release the plane
24、when adding oil, hydraulic, du you need to deflate
when adding oil, hydraulic, du you need to deflate
with no need to add oil when deflated, deflated need to add hydraulic
need to deflate when add oil , does not need deflate when add hydraulic
25、In our countrys airspace is refers( ) used between 300meters (1000 feet ) minimum vertical separation of any airspace.
in the flying height of 8900 meters (29100 feet ) and the flying height of 12500 meters (41100 feet )
in the flying height of 9000 meters and the flying height of 12000 meters
in the flying height of 10000 meters and the flying height of 13000 meters