Test for SICP training (Safety Integrated Capital Project)-调查问卷模板-问卷网

姓名

____________

部门

____________

What is the purpose of defining minimum mandatory requirements(MMR) in capital projects?

在资本项目中定义最低强制性要求（MMR）的目的是什么？

To replace local regulations替代当地法规

To reduce project costs降低项目成本

To ensure consistent application of safety requirements across all projects确保所有项目一致地落实安全要求

To speed up procurement加快采购流程

Which of the following are not included in the key safety aspects mapped in the minimum mandatory requirements (多选)

以下哪些不包含在最低强制性要求（MMR）所涵盖的关键安全领域中？

Electrical safety电气安全

Fire safety消防安全

Sustainability可持续性

Steel structure safety钢结构安全

Process safety工艺安全

Environmental safety环境安全

Which statement best describes the role of governance in safety management

以下哪项陈述最能描述治理在安全管理中的作用？

Governance replaces the need for safety roles治理取代了对安全岗位的需求

Governance is only about financial approvals治理仅与财务审批相关

Governance ensures compliance with the safety requirements throughout the project lifecycle治理确保在项目全生命周期内遵守安全要求

Governance is optional and only for large projects治理是可选的，仅适用于大型项目

What is the aim of leader standard work(LSW)

领导者标准工作（LSW）的目标是什么？

Define a structure to ensure the safety implementation in RFx定义一套结构，确保在 RFx（招标采购流程）中落实安全要求

Allow the leadership to implement a gap assessment to monitor the contractors' performance让管理层开展差距评估，以监督承包商的表现

Provide a routine for leaders to demonstrate their commitment to safety and lead by example为领导者提供一套固定流程，以展现其对安全的承诺并以身作则

To create operational standards for the project team members为项目团队成员制定作业标准

What guidance can be used for the implementation of the minimum mandatory safety requirements?

实施最低强制性安全要求时，可以参考哪些指导文件 / 标准？

ArcelorMittal corporate standard, RAGAGEPs, regulatory standards安赛乐米塔尔企业标准、公认通用工程实践（RAGAGEPs）、法规标准

RAGAGEPs, terms of reference, ArcelorMittal corporate standards, NFPA公认通用工程实践（RAGAGEPs）、职权范围、安赛乐米塔尔企业标准、美国消防协会标准（NFPA）

Terms of reference, RAGAGEPs, ArcelorMittal corporate standards, NFPA, EU职权范围、公认通用工程实践（RAGAGEPs）、安赛乐米塔尔企业标准、美国消防协会标准（NFPA）、欧盟标准

ArcelorMittal corporate standards, RAGAGEPs, terms of reference安赛乐米塔尔企业标准、公认通用工程实践（RAGAGEPs）、职权范围

Which of the following best describes the equipment safety management in capital projects?

以下哪项最能描述资本项目中的设备安全管理？

Scheduling staged safety checks during construction and operation while planning post-start-up adjustments for improvements在施工和运营阶段安排分阶段安全检查，同时规划投产后的调整优化

Standardising machine parts across projects to simplify procurement and reduce maintenance costs在各项目间标准化设备零件，以简化采购流程并降低维护成本

Conducting machine safety risk assessments and studies on illumination, noise, ventilation and ergonomics and identify and implement safeguards such as interlocks, noise barriers, etc开展设备安全风险评估，以及照明、噪声、通风和人机工效学相关研究，并识别和实施防护措施（如联锁装置、隔音屏障等）

Performing vendor safety reviews and selective field verification to balance project timelines with compliance开展供应商安全审核，并进行选择性现场验证，以平衡项目进度与合规要求

During the design of a new process facility, which approach best reflects fire safety management principles?

在新建工艺设施的设计阶段，哪种做法最能体现消防安全管理原则？

Install fire suppression and alarms after construction is complete to meet regulatory requirements在施工完成后安装灭火和报警系统，以满足法规要求

Fire safety management focus on protection of people, environment and asset through conducting studies for identification of fire hazards and integration of required fire protection and mitigation systems including provision for evacuation and emergency response消防安全管理的核心是保护人员、环境和资产，通过开展研究识别火灾隐患，并整合所需的消防防护与减灾系统（包括疏散和应急响应方案）

Focus only on fire-water systems while leaving personnel training for later stages仅关注消防水系统，将人员培训留到后期阶段

Conduct fire drills periodically without integrating detection or suppression systems into the design定期开展消防演练，但不将探测或灭火系统纳入设计

Which of the following best describes the primary objective of electrical safety management in capital projects?

以下哪项最能描述资本项目中电气安全管理的主要目标？

To ensure electrical systems are designed and installed to maximise energy efficiency and reduce operational costs确保电气系统的设计和安装以实现能源效率最大化和运营成本最小化

To prevent injuries and equipment damage along the asset lifecycle by integrating safety requirements across all project stages通过在项目各阶段整合安全要求，在资产全生命周期内防止人员受伤和设备损坏

To conduct electrical studies only during the commissioning phase to identify hazards仅在调试阶段开展电气研究以识别隐患

To standardise electrical equipment across projects for easier procurement and maintenance在各项目间标准化电气设备，以简化采购和维护流程

During plant operations, which approach best reflects effective process safety management?

在工厂运营阶段，哪种做法最能体现有效的工艺安全管理？

Conduct hazard analysis at pre-startup or during major changes仅在投产前或重大变更时开展危害分析

Monitor process risks, maintain barriers, and manage changes systematically持续监控工艺风险、维护防护屏障，并系统化管理变更

Focus on operational efficiency while periodically reviewing safety barriers专注于运营效率，同时定期评审安全屏障

Use inspections and operational feedback to adjust processes and controls通过检查和运营反馈来调整工艺与控制措施

What is the most effective approach to manage construction safety?

管理施工安全最有效的方法是什么？

Manage temporary works and materials, but leave overlapping tasks to be handled independently管理临时工程和材料，但交叉作业由各方自行处理

Define clear roles, ensure competent teams, coordinate SIMOPS, and monitor safety performance明确岗位职责、确保团队具备胜任能力、协调交叉作业（SIMOPS）并监控安全绩效

Implement emergency response plans only after incidents occur仅在事故发生后才实施应急响应计划

Focus mainly on contractor compliance and conduct reviews only at key milestones主要关注承包商合规性，仅在关键里程碑节点开展评审

Test for SICP training (Safety Integrated Capital Project)

相关模板