company has relevant safety regulations, and we would like to inform you of theWe appreciateyouunderstanding regarding any inconvenience this may cause:
1、进入公司必须遵守公司相关管理制度，爱护厂区环境;
All visitors need to comply with the safetymanagement system and please protectplant environment.
2、进入公司必须佩戴安全帽，穿戴对应马甲，安全帽及马甲由安全员统一发放，出公司时必须交还公司安全员;
Safety helmet and vest must be worn
when entering the plant, which will be
issued by safety personnel, and need to be
returned after leaving.
3、不得在公司和车间任何区域内吸烟，在规定的吸烟室方可吸烟;
Smoking is strictly prohibited except in
designated smoking areas.
4、不得在公司活动范围里嬉戏、打闹、攀谈，和公司员工扎堆闲谈;
Without permission.activities outside the
authorized area are prohibited.
5、不得在堆场卸货区内或吊车附近休息、闲谈;
Please do not rest or chat in the storage
yard unloading area or near cranes.
6、未经相关人员同意不得随意进入总装车间，未
经同意不得私自接、排水;
Without safety personnel approval,
unauthorized entry into the final assembly
workshop as well as water connection or
drainage is prohibited.
7、未经库管人员同意不得私自拿用堆场货物或工具物件使用;
Without warehouse managementapproval, no one may take or use goods or
tools from the storage yard.
8、不得私自使用车间所有机械设备和所有工器具；
Unauthorized use of all machinery andtools in the workshop is prohibited. 9、未经相关人员同意不得私自将机动车辆驶入厂区，驶入车辆应符合国家第五阶段气体燃料点 燃式发动机与汽车排放标准; Unauthorized vehicles have no access toenter the plant, and vehicles must meetthe National Stage V Standards for Gas-fueled Ignited Engine and VehicleEmission. 10、未经工具管理人员或相关管理人员同意不得私自拿用车间工器具或其他物件;如要使用得相关人员同意并经过培训登记后方可使用; Workshop tools, equipment and otherthings may only be used after obtainingapproval, receiving training, andcompleting registration. 11、在装卸过程中产生的垃圾或使用后生活垃圾须按本公司垃圾分类相关规定按标示分类回收; Waste that generated during loading andunloading or post-use household wastemust be classified and recycled in 12、进入车间有相关人员同意后方可进入，必须走安全通道且全程保证有工厂内部陪同人员在旁，进入工厂期间需严格遵循工厂信息保密原则，外来人员不得在车间工作区对工厂内部人 员，设备，文件以及其他相关生产资料进行拍 照和摄影、不得长时间逗留观看阻碍生产，参 观结束后续跟随陪同人员一同离开车间等相关敏感区域;
Entry into the workshop is permitted only
with approval from relevant personnel.
Visitors must stay within the designated
safety walkways and shall be
accompanied by an on-site factory staff
member at all times. During the tour,
visitors shall strictly obey the factory's
information-confidentiality rules.
External personnel are prohibited from
photographing or videotaping factory
employees, equipment, documents and
other production-related materials within
workshop work areas. Loitering or
activities obstructing production are not
allowed. After the visit is over, visitors
shall leave the workshop and othersensitive areas
13、如要在车间施工，高空作业、动火作业、电气
作业须填写相应的作业申请表，有安全管理人员同意认可后方可作业; High-altitude work, hot work andelectrical work require corresponding management personnel approval.
14、不得将随车铁质器件随意乱放在车间地面之上，经过防护后无损坏地面因素和无阻塞安全通道方可放置或放在车上; Support fixtures must not be arbitrarilyplaced on the workshop floor. They can
only be placed down after ensuring thereis no damage to the floor and noobstruction to safety passages. 15、必须严格执行作业审批制度，未经许可严禁进行有限空间等危险作业; The work approval system must be strictlyenforced, and unauthorized dangerouswork such as in confined spaces isprohibited. 16、外来供应商经过安全管理人员培训，知道相关安全管理细则后，在工作过程中不听从安全管理人员(现场指挥人员)劝解或指挥，明知故犯者，根据《承德总装厂安全环境奖励考核办法》给予考核。After receiving safety training andunderstanding rules, external supplierswho don't follow safety managementregulations will be assessed according tothe Chengde Final Assembly Plant and Environment Reward and Assessment Policy.
10题 | 被引用0次