Workshop Operation & Quality Safety Knowledge Test

Please read each question carefully and select the most appropriate answer based on standard operating procedures. The test consists of true/false, single-choice, and multiple-choice questions. Good luck!

Q1:Name

填空1

Q2:True or False: Alcohol can be casually poured onto a lint-free cloth. The more you use, the better the cleaning effect.

True (√)

False (×)

Q3:True or False: When wrinkles or damage are found on the electrode sheet, the operation should be immediately stopped and reported to the team leader for handling.

True (√)

False (×)

Q4:The general principle up first down second for workshop cleaning operations refers to ()

Clean the floor first and then the top of the Equipment

Clean the ceiling/top of Equipment first, and then the floor

Peripheral area first and then production area

First, the interior of the Equipment, then the outer shell

Q5:The unpacking of raw materials must be done at ()

Main production workshop

Buffer room/folding room

Warehouse floor

Transfer passage

Q6:The main Quality defect of water or liquid foreign material mixed into the cell is ()

Powder shedding from the electrode sheet

The battery cell is Scrap due to gas expansion

Blade wear

Increased welding slag

Q7:Right handling for the falling electrode sheets to the ground ()

Pick up and go straight to production

The entire Roll is Scrap and ground pollution sources are investigated

Blow clean and continue to use

Conceal and unreport

Q8:Equipment cleaning requirements when changing product models ()

Switch directly without cleaning

Carry out the complete changeover SOP and remove the residual Slurry dust

Only wipe the outer surface of the Equipment

Clean separately by the inspector

Q9:Standard storage method for electrode sheets ()

Dedicated clean shelves, sealed to prevent moisture and dust

Ground stacking saves space

Mix with tools and consumables

Store unpackaged and bare

Q10:Workshop Metal foreign objects included categories ()

Screws and nuts, laser slag

Copper powder, aluminium powder

Rust, steel ball debris

Copper foil and aluminum foil edge chips

Q11:The areas that operators need to cover for daily workstation cleaning are ()

Work surface, mold cavity

Equipment guide rails, crevices and dead corners

Workstation floor, Material turnover pallets

Shelf surfaces, workstation lighting enclosures

Workshop Operation & Quality Safety Knowledge Test

关于

2个月前

更新

频次

题目数

有问题？问问AI帮你修改改主题：如咖啡问卷改为奶茶问卷